Product category     - Touch ups - Waxes - Oils - Detergens - Fillers - Dyes - Polish - Restoration - Spray - Tools - Maintenance Kits - Display Stands ----- Products for industrial use Colour range    In order to view the technical and the safety data sheet you need the Adobe Acrobat Reader software. Click on the icon below in order to download it.   Technical data sheet (139 kb)     Safety data sheet (145 kb)   Code Cod. 1200 box 10 pcs. Description Melting wax stick of considerable hardness when set, no dripping. Special for window and doorframes, synthetic and modern surfaces, 95°C melting point. 90 light resistant colours available plus colour match service. For indoor use. Standard Colour: Light colours: 50 white, 65 ash, 05 pine, 40 maple, 42 beech, 06 birch, 10 larch, 54 douglas, 02 light natural oak, 51 light oak. Dark colours: 66 dark-cherry, 16 cherry, 62 mahogany, 33 dark mahogany, 58 rosewood, 48 medium oak, 52 dark oak, 53 light walnut, 59 medium walnut, 63 dark walnut. How to use Using a sharp knife remove any splinters or damaged wood from the area to be repaired in order to form a sound base for the application of the wax. Pre-stain the damaged area using a suitable shade of Touch-up dye pen, Colour edging pen, Touch-up dye or Colour touch-up, and fill with the wax. Using the Gas heating iron, melt the wax into the damage until it is full. Then apply the other waxes in various coats and shades until the colour is achieved. Wait until the wax is cold, remove any excess with a spatula or fine steel wool. To get the best shade, touch up with the Touch-up dye pen, Graining pen, Colour edging pen, Touch-up dye or Colour touch-up. Fix with a fine coat of Holzspray spray varnish. Previous Next Products Copyright 2005 ® B.P.S. srl