Home / EXTERIORS - Protection - Color

Naturaqua Holzwachs Lasur - 3in1 waterbased stain / finish in gel

code NAT3305XX


3in1 high solid waterbased self-sealing finish, wax and resin based, with high solid content and special gel formulation, to avoid dripping, for easy vertical application. The product penetrates deep into the wood enhancing the grain and providing a soft, polished finish. Yield: 8 – 12 m²/Lt Temperature: + 5°C / + 30°C Usage: Interior/Exterior With UV filters. The high-quality substances and UV filters in the product prevent the formation of dye rot and attacks by insects such as woodworm and beetles, while guaranteeing optimal resistance to water and weather conditions. Fast drying and almost VOC free thanks its natural density facilitates brush application.






Code NAT3305      - 6 x 375ml
Code NAT3315      - 6 x 750ml
Code NAT3325      - 2 x 2,5Lt
Code NAT3315.10 - 1 x 10Lt
Code NAT3315.20 - 1 x 20Lt

Method of Usage

Ready to use, brush application recommended (always for first coat) on clean dry surfaces.

On external surface apply at least 2 coat delayed by at least 8 hours.

Sand the surface with 220/240 grain for increased softness. 

For particularly special finishes, after brush application, ragging of the surface is recommended.
Total dry time: 24 hours.